BSF

Best Paper Feeding Technology

The Bourg Sheet Feeder is equipped with the best paper suction feed system, based on more than 3 decades of R&D. Capable of reliably feeding a wide range of paper types and paper weights.
Drawer and High Pile Loading

You can effortlessly load a ram of paper via the Drawer or insert a cart full of paper up to 500 mm (19.69”) into the High Pile.
Connect the Printer Carts

The High Pile is compatible with most production printers’ stacker cart/trolleys/pallets. This allows for efficient transfer from the printer to the BSF finisher without having to manipulate the paper, eliminating the risk of damage and errors.
Dual Barcode Scanning

The BSF comes with optional barcode scanners in both the Drawer and the High Pile. This allows the system to read job information for an automatic and accurate set-up while guaranteeing job integrity and sequency. Data extraction are easily available.

BPM

Connect with a Booklet Maker, a Binder, or a Stacker

Connect the BPM's output with a BME Booklet Maker, a BB3002 Perfect Binder, or a BPS Stacker.
Format Changing: 2-up or 4-up Imposition

The Bourg Preparation Module (BPM) allows for rapid format changing. No matter the appl application, the BPM allows for a printed SRA3 sheet to become either an A4 or an A5 document with a single pass.
Bleed/trim up to 100 mm (3.94")

Sheets coming from the upstream device are precisely registered allowing for sharp bleed/trim of the edges of the paper, effortlessly removing white edges. The minimum bleed trim is of 4 mm (0.1610") and the maximum is 100 mm (3.94").
Premium Quality Creasing

The BPM is equipped with a rotary knife matrix creaser allowing for the highest quality cross-track creases without stopping the sheet. This technology is superior to a crease wheel as breaks the fibers of the paper in a single stroke, significantly reducing the risk of air bubbles / marking on laminated sheets.
Rotation

Sheets can be rotated clockwise before registration. The vacuum level for registration is automatically adjusted based on the media type, size, and weight and on whether the rotation is enabled or not.
Precise Cut & 2-up Production

The BPM cross-track cuts the sheets perpendicularly to their width into two identical pages. It also creates a gap between these two half sheets to enable sheet processing downstream.
Cross Track Perforation

A cross-track perforation can be added in order to create easy to tear documents. This allows for booklets and books with perforated sheets when combining the BPM with a booklet maker or a perfect binder. Custom perforation may be requested with the desire teeth per inch blades.

BPS

Stacking

The BPS is stacking sheets with or without offset to separate sets. Once the stack reaches the maximal capacity, the automatic delivery process is initiated. The delivery process works in an "unload while run" mode, with stacking continuing while a stack is waiting to be picked up by the operator. As soon as that stack is picked up, the stacking table is automatically going back in the BPS.
Attention Light

When a stack is ready on the BPS, the attention light on top of the unit starts flashing, the front shutter door opens up and the delivery table comes out of BPS then up. The attention light changes to solid on to warn the operator that a stack is ready to be picked up.
Top Tray

The BPS is equipped with a top tray which can be used as a sample tray or to receive diverted sheets thanks to an automatic jam detection process, to minimize job recovery time.

Solution d'empilage

Caractéristiques

Applications finales

Tailles des médias

Caractéristiques techniques

Dimensions

Actualités